Zhejiang Sunrise Photovoltaic Technology Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Sullivan Chloe
  • Company Name : Zhejiang Sunrise Photovoltaic Technology Co., Ltd.
  • Tel : 86-0573-87871959
  • Fax : 86-0573-87871939
  • Address : Zhejiang,Jiaxing,No. 2, Shanhong Road, Yuanhua Town
  • Country/Region : China
  • Zip : 314416

Compact Pressurized Solar Water Heater

Compact Pressurized Solar Water Heater
Product Detailed
Compact Pressurized Solar Water Heater 1.approved by CE 2.electric heating elements 3.well wind snow and hail resistanc TypePressureCirculation TypeConnection TypeInstallationHousing MaterialCertificationCapacityPlace of OriginBrand NameModel NumberCAPACITY
Evacuated Tube
Pressurized
Indirect / Closed Loop (Active)
Direct-Plug
Freestanding
Stainless Steel
CE
200
Zhejiang, China (Mainland)
SUNRISE or OEM
SR1
180L-300L
 

ISO CE CERTIFICATIONS SOLAR KEY MARK AND SRCC ARE UNDER APPLYING SMALL ORDERS ACCEPTED COMPETITIVE PRICE PROMISED QUALITY

 

SUNRISE has developed a water heater which combines heat pipe solar collector and storage tank into one product. Heat pipe tube is directly inserted into the water tank. The heat pipe evacuated tube collect heat with high efficiency transforming of the incoming solar irradiation into heat. The condenser transfers the generated heat to the manifold where the water is heated.

 

Advantages:

1) Adopts the best conduction performance metal- heat pipe (copper). 2) Start up quickly, heat pipes transfer the heat energy into the storage tank in one direction3) No water inside the evacuated tubes, the solar water heater can still in service even with several tubes breakage4) Can be used all year round in the cold climate

 

Specifications:

Heat exchanger: Heat pipe solar collector

Tank:   100L – 300L 

Inner tank: Stainless steel food grade SUS 304-2B

                  Thickness: 1.2mm

      Outer tank: Colorplate      Thickness: 0.31mm

      Thermal insulator: Polyurethane foam    Thickness: 50mm

Operate temperature:  >-10°C

Work pressure: 8bar (0.8 Mpa)

Frame:

                  Material: Galvanized sheet

                   Fasteners: stainless steel screws

                   Angle: 20, 27, 38, 45

Thickness: 1.2 mm

Seal Material: polymer silica plastic

Tube Specifications are at the bottom

Installation Instructions:

   Because of its work principle, it can pressure up to 8 bar(0.8Mpa) when operates.

So it needn’t height fall. Naturally, you can install the solar water heater on the roof, ground, or on the balcony, when you use hot water on the ground floor or on the second floor.

    

Compact Pressurized Solar Water Heater

Other products


Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.